Air-cooled servo regulators include single-phase air-cooled servo regulators, industrial servo regulators, industrial servo regulators, automatic variable transformers, etc. The output voltage stability of the servo regulator can be optimized by the load and the load to absorb current. In this way, no additional electrical energy will be consumed under low pressure and high pressure.
The air-cooled stabilizer can be used with natural wind and forced-air cooling in the range of 3-500 KVA. The air-cooled heat dissipation regulator includes a regulator storage box. The top of the regulator storage box is provided with a sixth heat dissipation box. One side of the sixth heat dissipation box is provided with a first heat dissipation box, and the other side is provided with a third heat dissipation box. Cooling box.
The self-cleaning heat sink is to overcome the above-mentioned defects in the prior art and provide a self-cleaning air-cooled heat sink with automatic purification, high speed, high efficiency, and thorough dust removal.
The self-cleaning heat dissipation device is equipped with a positive and negative speed regulating fan, which rotates forward to dissipate heat during normal operation. When a clean filter is required, the positive and negative speed regulating the fan will blow the dust on the filter through a more powerful reverse blow. Blow out the air duct.
The device includes a controller, a power detector, a filter screen(industrial servo motor voltage regulator), and a forward and reverse speed regulating fan set in the heat dissipation air duct. The power detector is respectively connected with the controller and the forward and reverse speed regulating fan, and the filter screen is set at the outlet of the heat dissipation air duct. Place.
When the heat dissipation duct performs normal heat dissipation, the forward and reverse speed regulating fan will run forward according to the set forward power.
When the controller detects that the power of the forward and reverse speed regulating fan exceeds the threshold through the power detector, the controller determines that the filter The dust on the network needs to be removed, and a control signal is sent to control the forward and reverse speed regulating fan to reverse, and generate a reverse airflow to blow off the dust on the filter.